- 583 -
Syntax
ipv6 ospf retransmit-interv al <seconds>
no ipv6 ospf retransmit-interval
<no> - This command sets the default OSPF retransmit Interval for the specified interface.
Default Setting
5
Command Mode
Interface Config
10.4.2.10 ipv6 ospf transmit-delay
This command set s the OSPF Tran sit Delay for the specified interf ace. The tra n smit delay is spe cified in
seconds. In addition, it sets the estimated number of second s it takes to transmit a link state update
packet over this interface. Valid values for <seconds> range from 1 to 3600 (1 h our).
Syntax
ipv6 ospf transmit-delay <seconds>
no ipv6 ospf transmit-delay
<no> - This command sets the default OSPF Transit Delay for the specified interface.
Default Setting
1
Command Mode
Interface Config
10.4.2.11 ipv6 router ospf
Use this command to enter Router OSPFv3 Config mode.
Syntax
ipv6 router ospf
Default Setting
None