- 94 -
<slot/port> - Interface number.
Default Setting
None
Command Mode
Global Config
7.2.6.14 show ip igmp snooping
The user can go to the CLI Privilege Exe c to get all of igmp snoopin g information, use the show ip igmp
snooping Privilege command.
Syntax
show ip igmp snooping
Default Setting
None
Command Mode
Privilege Exec
Display Message
When the optional arguments <slot/port> or <vlanid> are not used, the command displays the following
information.
Admin Mode: Indicates whether or not IGMP Snoopi ng is active on the switch.
Interfaces Enabled for IGMP Snooping: Interfaces on which IGMP Snooping is enabled.
Multicast Control Frame Count: Displays the number of IGMP Control frames that are processed
by the CPU.
VLANs Enabled for IGMP Snooping: VLANs on which IGMP Snooping is enabled.
When you specify the <slot/port> value s , the following information displays.
IGMP Snooping Admin Mode: Indicates whether IGMP Snooping is active on the interfa ce.
Fast Leave Mode: Indicates whether IGMP Snooping Fast L eave is active on the interface.
Group Membership Interval : Shows the amount of time in seconds that a swit ch will wait for a report
from a particular group on a particul ar interface, which is participating on the interface, befo re deleting
the interface from the entry. This value may be configure d.
Max Response Time: Interface on which IGMP Snooping is enabled.
Multicast Router Expiry Time : Displays the amount of time to wait before removing an interface that
is participating on the interface fro m the list of interfaces with multicast routers attached. The interface
is removed if a query is not received. This value may be configured .