- 278 -
Syntax
sntp unicast client poll-timeout <poll-time out>
no sntp unicast client poll-timeout
< poll-timeout > - Polling timeout in se conds. The range is 1 to 30.
no - This command will reset the poll t i meout for SNTP unica st clients to its default value.
Default Setting
The default value is 5.
Command Mode
Global Config
7.10.2.6 sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients in seconds.
Syntax
sntp unicast client poll-retry <poll-retry>
no sntp unicast client poll-retry
< poll-retry> - Polling retry in seconds. The range is 0 to 10.
no - This command will reset the poll retry for SNTP unicast clients to its default value.
Default Setting
The default value is 1.
Command Mode
Global Config
7.10.2.7 sntp server
This command configure s an SNTP server (with a maximum of three) where the server address can b e
an ip address or a domain name and the address type either IPv4, IPv6, dnsv6 or dns. The optional
priority can be a value of 1-3, the version is a value of 1-4, and the port id is a value of 1-65535.
Syntax
sntp server <ipaddress/ipv6address/domain-name> <addresstype> [<1-3> [<version> [<portid>]]]
no sntp server remove <ipaddress/ipv6address/domain-name>