- 742 -
11.3.16 Managing MLD Snooping Querier
11.3.16.1 Configuring MLD Snooping Querier Configuration Page
Use this menu to configure the parameters fo r MLD Snoopin g Querier, Note that only a user with
Read/Write access privileges may change the data on this screen.
Selection Criteria
Snooping Querier Admin Mode - Select the administrative mode for MLD Snooping for the switch
from the pulldown menu. The default is disable.
Configurable Data
Snooping Querier Address - Specify the Snoopi ng Querier Address to be used as source address
in periodic MLD queries. This addre ss is used whe n no addre ss is config ured on the VLAN on which
query is being sent.
MLD Version - Specify the MLD protocol version used in periodic MLD queries. MLD queries.
Query Interval - Specify the time interval in second s between periodic queries sent by the snooping
querier. The Query Interval must be a value in the range of 1 and 1800. The default value is 60.
Querier Expiry Interval - Specify the time interval in second s after which the last querier info rmation
is removed. The Querier Expiry Interval must be a value in the rang e of 60 and 300. The default value
is 60.
Configurable Data
Submit - Update the switch with the configure d values.
Refresh - Reload the information on the page.