- 92 -
Syntax
set igmp fast-leave <vlanid>
no set igmp fast-leave <vlanid>
<vlanid> - VLAN ID (Range: 1 – 3965).
Default Setting
Disabled
Command Mode
VLAN Mode
7.2.6.10 set igmp groupmembership-interval
The user can go to the CLI VLAN Configuration Mode to set the IGMP Group Membership Interval time on
a particular VLAN, use the set igmpgroupmembership-interval <vlanid> <2-3600> vlan configuration
command. Use the no set igmp groupmembership-interval <vlanid> return t o default value 260.
Syntax
set igmp groupmembership-interval <vla nid> <2-3600>
no set igmp groupmembership-interval <vlanid >
<vlanid> - VLAN ID (Range: 1 – 3965).
<2-3600> - The range of group membership interval time is 2 to 3600 seconds.
Default Setting
260
Command Mode
VLAN Mode
7.2.6.11 set igmp maxresponse
The user can go to the CLI Interface VLAN Mode to set the IGMP Maximum Re sponse time on a
particular VLAN, use the set igmp maxrespon se <vlanid> <1-25> vlan configuration command. Use the
no set igmp maxresponse <vlanid> return to default value 10
Syntax
set igmp maxresponse <vlanid> <1 -25>
no set igmp maxresponse <vlanid>