- 607 -
None
Command Mode
Privileged Exec
User Exec
Display Message
Slot Port: Valid unit, slot, and port number separated by forward slashes.
IP Address: The IP address of the specified interface.
Subnet Mask: The Subne t Mask for the IP address of the PIM interface.
Hello Interval (secs): The frequency at whi ch PIM hello messa ges are transmitted on this i nterface.
By default, the value is 30 seconds.
Join Prune Interval (secs ): The join/prune interval for the PIM-S M router. The interval is in secon ds.
Neighbor Count: The neighbor count for the PIM-SM interface.
Designated Router: The IP address of the Designated Router for this interface.
DR Priority: The priority of the Designated Router.
BSR Border: The boot strap router border interface. Possible valu es are enabled or disabled.
10.7.1.4 show ipv6 pimsm neighbor
This command displays the neighbor information for PIM-SM on the spe cified inte rface.
Syntax
show ipv6 pimsm neighbor {<unit/slot/p ort> | all}
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid unit, slot, and port nu mber separated by forward sl ashes.
IP Address: The IP address of the neighbor on an interface.
Up Time: The time since this neighbor has become active on this interface.
Expiry Time: The expiry time of the neighbor on this interface.
10.7.1.5 show ipv6 pimsm rphash
This command displays which rendezvous point (RP) is being used for a specified group.