- 776 -
Selection Criteria
Interface - Specifies the list of all the ports on whi ch LLDP-MED frames can be transmitted.
Non-Configurable Da ta
Network Policy Information - Specifies if network policy TLV is present in the LLDP frames.
Media Application Type - Specifie s the application type. Types of application types are
unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice, videoconferencing,
streammingvideo, vidoesignalling. Each application type that is received has the VLAN id, priority,
DSCP, tagged bit status and unknown bit status. A port may receive one or many such application
types. If a network policy TLV has been transmitted only then would this information be displayed.
Vlan Id - Specifies the VLAN id associated with a particular policy type.
Priority - Specifies the priority associated with a particular policy type.
DSCP - Specifies the DSCP associated with a particular policy type.
Unkno wn Bit Status - Specifies the unknown bit associated with a particula r policy type.
Tagged Bit Status - Specifies the tagged bit associated with a pa rticular policy type.
Inventory - Specifies if inventory TLV is present in LLDP frame s.
Hardware Revisions - Specifies hardware version.
Firmware Revisions - Specifies Firmwa re v er sion.
Software Revisions - Specifies Software version.
Serial Number - Specifies serial number.
Manufacturer Name - Specifies manufacturers name.
Model Name - Specifies model name.
Asset ID - Specifies asset id.
Location Information - Specifies if location TLV is present in LLDP frames.
Sub Type - Specifies type of location information.
Location Information - Specifies the location info rm ation as a stri ng for given t y pe of location id
Extended PoE - Specifies if local device is a PoE device.
Device Type - Specifies po wer device type.
Extended PoE PSE - Specifies if extended PSE TLV is present in LLDP frame.
Available - Specifies avail able power sourcing equip ment's power value in tent hs of watts on the
port of local device.
Source - Specifies power sou rce of this port.
Priority - Specifies PSE port power priority.
Extended PoE PD - Specifies if extended PD TLV is present in LLDP frame.
Required - Specifies requi red power device power value in tenths of watts on the port of local
device.
Source - Specifies po wer source of this port.
Priority - Specifies PD port power priority.
Command Buttons
Refresh - Updates the information on the page.