- 927 -
Scheduler Type - Specifies the type of scheduli ng used for this queue.
Scheduler Type can only be one of the following:
• strict
• weighted
Default value is weighted.
Queue Management Type - Queue de pth management technique used for queues on thi s interface.
This is only used if device supports independ ent settings per-queue.
Queue Management Type can only be:
• taildrop
Default value is taildrop.
Configurable Data
Minimum Bandwidth Allocated - Specifies the su m of individual Minimum Bandwidth values for all
queues in the interface. The sum cannot exceed the defined maximum (100). This value is
considered while configuring the Minimum Bandwidth for a queue in the sele cted interface.
Minimum Bandwidth - Specifies the minimum guaranteed bandwidth allotted to this queue. Setting
this value higher than its corresponding Maximum Bandwidth automatically increases the maximum
to the same value. Default value is 0. Valid Range is (0 to 100) in increments of 5 . The value 0 means
no guaranteed minimum. Sum of individual Minimum Bandwidth values for all queues in the selected
interface cannot exceed defined maxim um (10 0).
Command Buttons
Restore Defaults for All Queues - Re stores default settings for all queues o n the selected interface.
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.7.4.5 Viewing CoS interface queue status
Selection Criteria
Slot/Port - Specifies all CoS configura ble interface s. The option " Global" rep resent s the most re cent
global configuration settings. These may be overridden on a per-interface basis.
Non-Configurable Da ta
Queue ID - Specifies the queueID.