- 823 -
Maximum Advertise Interval (secs) - The maximu m time (in seconds) allowed between router
advertisements sent from the interfa ce.
Minimum Advertise Interval (secs) - The minimum time (in seconds) allowed between router
advertisements sent from the interfa ce.
Advertise Lifetime (secs) - The value (in seconds) used as the lifetime field in router advertisements
sent from the interface. This is the maximum length of time that the advertised addresses are to be
considered as valid router addresses by hosts.
Preference Level - The preference level of the router as a default router relative to other routers on
the same subnet. Higher numbered addresses are preferred.
11.4.7 Managing Route Table
11.4.7.1 Viewing Router Route Table
Non-Configurable Da ta
Network Address - The IP route prefix for the destination.
Subnet Mask - Also referred to as the subnet/network mask, this i ndicates the portion of the IP
interface address that identifies the attached network.
Protocol - This field tells which protocol created the specifie d route. The possibilities are one of the
following:
• Local
• Static
• Default
• OSPF Intra
• OSPF Inter
• OSPF Type-1
• OSPF Type-2
• RIP
Next Hop Slot/Port - The outgoing rout er interface to use when forwarding traffic to the destination.