- 712 -
Selection Criteria
Group ID - The protected ports can be combined into a logical group. Traffic can flow between
protected ports belongin g to different groups, but not within the same group. The selection b ox lists all
the possible protected port Group IDs supported for the current platform. The valid range of the Group
ID is (0 to 2) .
Configurable Data
Group Name - It is a name associated with the protected ports group used for identification purposes.
It can be up to 32 alphanumeric characters long, including bl anks. The default is blank. This field is
optional.
Protected Ports - The selection list con sists of physical ports, prot ected as well as unprotecte d. The
protected ports are highlighted to differentiate bet ween them. No traffic forwarding is possible
between two protected ports. If left unconfigured, the default state is unprotected.
Command Buttons
Submit - Update the switch with the values ente red. F or the switch to retain new values across a
power cycle, a save operation is a must.
11.3.6.2 Protected Ports Summary Page
Non-Configurable Da ta