- 828 -
Local - This field displays the local route preference value.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.4.8 Managing VLAN Routing
11.4.8.1 Configuring VLAN Routing
Selection Criteria
VLAN ID - Enter the ID of a VLAN you want to configure for VLAN Routing. Initially, the field will
display the ID of the first VLAN. After you enter a new VLAN ID and click on the Create button the
non-configurable data will be displayed. See below for detailed instructions on how to use that data to
complete the configuration of the VLAN.
Non-Configurable Da ta
Slot/Port - The interface assigned to the VLAN for routing.
MAC Address - The MAC Address assigned to the VLAN Routing Interface.
Command Buttons
Create - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Delete - Remove the VLAN Routing Interface specifi ed in the VLAN ID input field from the router
configuration.
Instructions for creating a VLAN
• Enter a new VLAN ID in the field labeled VLAN ID.
• Click on the Create button. The page wi ll be updated to display the interface and MAC address
assigned to this new VLAN. The IP address a nd Subnet Mask fields will be 0.0.0.0.
• Note the interface assigned to the VLAN.
• Use the index pane to change to the IP Interface Configuration page.
• Select the interface assigned to the VLAN. The IP address and Subnet Mask fields will be 0.0.0.0.
• Enter the IP address and subnet mask for the VLAN.
• Select the Submit button.