- 759 -
Designated Cost - Path Cost offered t o the LAN by the Designated Port.
Designated Bridge - Bridge Identifier of the bridge with the Design ated Port. It is made up using the
bridge priority and the base MAC address of the bridge.
Designated Port - Port Identifier on the Designated Bridge that offers the lowest cost to the LAN. It is
made up from the port priority and the interface number of the port.
Loop Inconsistent State - This parameter identifie s whether the p ort is in loop inconsistent state.
Transitions Into Loop Inconsistent State - The number of times this interface has transitioned into
loop inconsistent state.
Transitions Out Of Loop Inconsistent State - The number of times this interface has tran sitioned
out of loop inconsistent state.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These changes will
not be retained across a power cycle unless a save configuration is performed.
Refresh - Refreshes the screen with most recent data.
11.3.19.6 Viewing Spanning Tree Statistics Page
Selection Criteria
Slot/Port - Selects one of the physical or LAG interfaces of the switch.
Non-Configurable Da ta
STP BPDUs Received - Number of STP BPDUs received at the selected port.
STP BPDUs Transmitted - Number of STP BPDUs transmitted from the selected port.
RSTP BPDUs Received - Number of RSTP BPDUs received at the selected p ort.
RSTP BPDUs Transmitted - Number of RSTP BPDUs transmitted from the selected port.
MSTP BPDUs Received - Number of MSTP BPDUs receive d at the selected port.
MSTP BPDUs Transmitted - Number of MSTP BPDUs transmitted from the selected port.