- 730 -
MAC Filter - This is the list of MAC add ress and VLAN ID pairings for all configured L2M cast Groups.
To change the port mask(s) for an existing L2Mcast Group, select the entry you want to chan ge. To
add a new L2Mcast Group, select "Create Filter" from the top of the list.
VLAN ID - The VLAN ID used with the MAC add ress to fully identify packets you want L2Mca st
Group. You can only change this field when you have selected the "Create Filter" option.
Configurable Data
MAC Address - The MAC address of the L2Mcast Group in the format 01:00:5E:xx:xx:xx. You can
only change this field when you have selected the "Create Filter" o ption. You cannot define L2Mcast
Group for these MAC addresses:
00:00:00:00:00:00
01:00:5E:00:00:01 to 01:00:5E:00:00:FF
FF:FF:FF:FF:FF:FF
Solt/Port(s) - List the ports you want included into L2 Mcast Group.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the swit ch to retain the new
values across a power cycle you must perform a save .
Delete - Remove the currently selected L2Mcast Group.
11.3.13.10 Viewing L2 Multicast Group Status Page
Use this panel to display information about entries in the L2Mcast Static/Dynamic Groups. These entrie s
are used by the transparent bridging function to dete rmine h ow to forward a received frame.
Non-Configurable Da ta
VLAN - L2Mcast Group's V LAN ID value.
MAC Address - A multicast MAC addre s s for which the switch has forwarding information. The
format is a six-byte MAC address. For example: 01:00:5E:00:11:11.
Slot/Ports - the interface number belongs to this Multicast Group.
Active State - The active interface number belongs to this Multicast Group.
Command Buttons
Refresh - Refresh the database and display it again starting with the first entry in the table.