- 464 -
point-to-point network. For point-to-point networks, OS PF does not elect a desig nated router or generate
a network link state advertisement (LSA). Both endpoints of the link must be configured to operate in
point-to-point mode..
no ip ospf network command to return the OSPF network type to the default.
Syntax
ip ospf network {bro adcast|point-to-point}
no ip ospf network
Default Setting
Broadcast
Command Mode
Interface Config
8.3.2.42 ip ospf priority
ip ospf priority command sets the OSPF priority for the specified router interface. The priority of the
interface is a priority integer from 0 to 255. A value of 0 indicates that the router is not eligibl e to become
the designated router on this network. no ip ospf priority command sets the default OSPF priority for the
specified router interface.
Syntax
ip ospf priority <0-25 5>
no ip ospf priority
Default Setting
1, which is the highest router pri ority
Command Mode
Interface Config
8.3.2.43 ip ospf retransmit-interval
ip ospf retransmit command sets the OSPF retransmit Interval for the specified interface. The retransmit
interval is specified in seconds. The value for <seconds> is the number of seconds between link-state
advertisement retransmissions for adjacencies belonging to this router interface. This value is also used
when retransmitting database descri ption and link-state request packets. Valid values range from 0 to
3600 (1 hour). no ip ospf retransmit command sets the default OSPF retransmit Interval for the
specified interface.
Syntax