- 421 -
Default Time to Live: The computed TTL (Time to Live) of forw ardi ng a packet from the local router
to the final destination.
Routing Mode: Show whether the routing mode is enabled or disa bled.
IP Forwarding Mode: Disable or enable the forwardi ng of IP frames.
Maximum Next Hops: The maximum number of hops suppo rted by this switch.
8.2.1.2 show ip interface port
This command displays all pertinent information about the IP interfaces.
Syntax
show ip interface port <slot / port>
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
IP Address: Is an IP address representing the su bnet configuration of the router interface.
Subnet Mask: Is a mask of the network and host portion of the IP address for the router interface.
Routing Mode: Is the administrative mode of router interface participation. The possible values are
enable or disable.
Administrative Mode Is the administra t ive mode of the specified interface. The possible values of
this field are enable or disable. This val ue was configured into the unit.
Forward Net Directed Broadcasts: Displays whether forwarding o f network-directed broadcasts is
enabled or disabled.
Active State: Displays whether the interface is active or inactive. An interface is considered active if
its link is up and it is in forwarding state.
Link Speed Data Rate: Is an integer re presenting the physical link data rate of the specified
interface. This is measured in Megabits per second (Mbps).
MAC Address: Is the physical ad dress of the specified interface.
Encapsulation Ty pe: Is the en capsulation type for the specified interface.
IP MTU: Is the Maximum Transmissi on Unit size of the IP packet.
Bandwidth: Shows the bandwidth of the interface.
Destination Unreachable s: Shows whether ICMP Destination Un reachable me ssages may be sent
(enabled) or not (disabled).
ICMP Redirects: Shows whether ICMP Redirect mode is enabled or disabled.