- 287 -
7.12.1.5 show lldp remote-device detail
This command uses to display detailed information about remote dev ices that transmit current LLDP data
to an interface on the system.
Syntax
show lldp remote-device detail <slot/port>
<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDPDU from the remo te device.
Remote Identifier: An internal identifier to the switch to mark each remote device to the system.
Chassis ID Subtype: Shows the type of identification used in the Chassis ID field.
Chassis ID: Identifies the chas sis of the remote device.
Port ID Subtype: Identifies the type of port on the remote device.
Port ID: Shows the port number that transmitted the LLDPDU.
System Name: Shows the system name of the remote device.
System Description: Describ es the remote system by identifying the system name and versions of
hardware, operating system , and networking software supported in the device.
Port Description: Describes the port in an alpha-numeric format. The port description is
configurable.
System Capabilities Supported: Indicates the primary function(s) of the device.
System Capabilities Enabled: Shows which of the supported system capabilities are enabl ed.
Management Address: For each interface on the re mote device with an LLDP agent, lists the type of
address the remote LLDP agent uses a nd specifies the address used to obtai n informatio n related to
the device.
Time To Live: Shows the amount of time (in seconds) the remote device's informa tion received in the
LLDPDU should be treated as valid information.
7.12.1.6 show lldp local-device
This command uses to display summary information about the advertised LLDP local data. This
command can displ ay summary information or detail for each inte rface.