- 174 -
This command sets a client IP mask for an SNMP community. The addre ss is the associated co mmunity
SNMP packet sending address and i s used along with the client IP addres s value to denote a range of IP
addresses from which SNMP clients may use that community to acce ss the device. A value of
255.255.255.255 will allow access from only one station, and will use that machine's IP address fo r the
client IP Address. A value of 0.0.0.0 will allow access from any IP address. The name is the applicable
community name.
Syntax
snmp-server community ipmask <ipmask> <name>
no snmp-server community ipmask <name>
<name> - community name.
<ipmask> - a client IP mask.
no - This command sets a client IP mask fo r an SNMP community to 0.0.0.0. The name is the
applicable community name. The community name may be up to 16 alphanumeric characters.
Default Setting
0.0.0.0
Command Mode
Global Config
This command restri cts access to switch information. The access mode is read-only (also called public) or
read/write (also called private).
Syntax
snmp-server community {ro | rw} <name>
<name> - community name.
<ro> - access mode is read-only.
<rw> - access mode is read/write.
Default Setting
None
Command Mode
Global Config
7.3.5.7 snmp-server community ipaddr
This command sets a client IP address for an SNMP community. The address i s the associated
community SNMP packet sending address and is used along with the client IP mask value to denote a