- 912 -
IP ACL - Specifies list of all IP ACLs. This field is visible only if the user has selected "IP ACL" as "ACL
Type".
IPv6 ACL - Specifies list of all IPv6 ACLs. This field is visible only if the user has selected "IPv6 ACL"
as "ACL Type".
MAC ACL - Specifies list of all MAC ACLs. This field is visible only if the user has selected "MAC
ACL" as "ACL Type".
Sequence Number - An optional sequence n umber may be specified to indicate the orde r of this
access list relative to other access li sts already a ssigned to this VL AN and dire ction. A lowe r number
indicates higher precedence order. If a sequence number is already in use for this VLAN and
direction, the specified access list replaces the currently attached a ccess list u si ng that sequence
number. If the sequence numbe r is not spe cified by the user, a sequen ce numb er that is on e greater
than the highest sequence number currently in use for this VLAN and direction will be used. Valid
range is (1 to 4294967295).
Non-Configurable Da ta
Slot/Port - Displays selected interface
VLAN ID(s) - Displays selected VLAN Id.
Direction - Displays selected packet filtering direction for ACL.
ACL Type - Displays the type of ACL assi gned to selected VLAN and direction.
ACL Identifier - Displ ays the ACL Number(in case of IP ACL) or ACL Name(in case of IPv6 ACL and
MAC ACL) identifying the ACL assigned to selected VLAN and direction.
Sequence Number - Displ ays the Sequence Number signifying the order of specified ACL relative to
other ACLs assigned to selected VLAN and direction.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Remove - Removes the currently selected ACL VLAN Direction M apping from the switch
configuration.

11.7.1.12 Access Control List VLAN ACL Summary Page

Non-Configurable Da ta
Summary Display Selector - Select interface or VLAN to display summary. By default sum mary of
Interface-based ACL(s) is displayed.
Slot/Port(s) - The interfaces to which the IP ACL applies.