- 492 -
<1-255> - The range of virtual route r ID is 1 to 255.
< 1-254 > - The range of decrement is 1 to 254.
<no> - This command removes the interface from the tracked li st or to restore the priority decrement
to its default.
Default Setting
Decrement: 10
Command Mode
Interface Config
8.8.2.9 ip vrrp track ip route
This command tracks the route reachability. When the tracked route is deleted, the priority of the VRRP
router will be decremented by the value spe cified in the decrement argument. When the tracked route is
added, the priority will be incremente d by the same.
A VRRP configured interface can track m ore than one route. When a tracked route goes down, then the
priority of the router will be decreased by 10 (the default priority decrement) for each downed route. By
default no routes are tracked. If you specify just the route to be tracked, without giving the optional priority,
then the default priority will be set. The default prio rity decrement is 10. The default priority decrement is
changed using the decrement argument.
Syntax
ip vrrp <1-255> track ip ro ute <ip-address/prefix-length> [decrement <1-254>]
no ip vrrp <1-255> track ip route <i p-address/prefix-length> [decrement]
<1-255> - The range of virtual route r ID is 1 to 255.
< 1-254 > - The range of decrement is 1 to 254.
<no> - This command removes the route from the tracked list or to restore the priority decrement to its
default. When removing a tracked IP route from the tra cked list, the priority should be increme nted by
the decrement value if the route is not reachable.
Default Setting
Decrement : 10
Command Mode
Interface Config