- 79 -
GVRP Admin Mode: This display s the admini strative mode of GARP VLAN Registration Protocol
(GVRP) for the system.

7.2.5.2 show gvrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one o r all
interfaces.
Syntax
show gvrp configuration {<slot/port> | all}
<slot/port> - An interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: This displays the slot/port of the interface that this row in the table describes.
Join Timer: Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes a re a VLAN or multicast group. There is
an instance of this timer on a per-Port, p er-GARP part icipant basi s. Permissible value s are 10 to 100
centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest
granularity of specification is 1 centisecond (0.01 seconds).
Leave Timer: Specifies the period of time to wait after re ceiving an unregister request for an attribute
before deleting the attribute. Current attributes are a VLAN or multi c ast group. This may be
considered a buffer time for another stati on to assert registration for the same attribute in order to
maintain uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant
basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60
centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
LeaveAll Timer: This Leave All Time controls how frequently LeaveAll PDUs are ge nerated. A
LeaveAll PDU indicates that all registrations will shortly be deregi stered. Participants will need to
rejoin in order to maintain registration. There is an instance of this timer on a per-Port, per-GARP
participant basis. The Leav e All Period Timer is set to a random value in the ran ge of LeaveAll- Time
to 1.5*LeaveAllTime. Permissible values a re 200 to 6000 centiseconds (2 to 60 seconds). The factory
default is 1000 centiseconds (10 seconds). The finest granularity of specification is 1 centisecond
(0.01 seconds).
Port GVRP Mode: Indicates the GVRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time, and Leave All Time have no effect. The
factory default is disabled.