- 52 -
7.2.1.7 capabilities
This command is used to set the capabilities on specific interfa ce.
i
The 10-Giga interfaces will not provide the following command.
Syntax
capabilities {{10 | 100 } {full-duplex | half-duplex}} | {10 00 full-duplex }
no capabilities {{10 | 100 } {full-duplex | half-du plex}} | {1000 full-duplex }
10 - 10BASE-T
100 - 100BASE-T
1000 - 1000BASE-T
full-duplex - Full duplex
half-duplex - Half duplex
no - This command removes the advertised capability with using p arameter.
Default Setting
10 half-duplex, 10 full-duplex, 100 half-d uplex, 100 full-duplex, and 1000 full-duplex
Command Mode
Interface Config
This command is used to set the capabilities on all interfaces.
Syntax
capabilities all {{10 | 100} {full-du plex | half-duplex}} | {1000 full-duplex }
no capabilities all {{10 | 100} {full-duplex | half-duplex}} | {1000 full-duplex }
10 - 10BASE-T
100 - 100BASE-T
1000 - 1000BASE-T
full-duplex - Full duplex
half-duplex - Half duplex
all - This command represents all interfaces.
no - This command removes the advertised capability with using p arameter
Default Setting
10 half-duplex, 10 full-duplex, 100 half-d uplex, 100 full-duplex, and 1000 full-duplex