Fortinet 548B 7.24 CoS (Class of Service) Command

- 401 -
Command Mode
Global Config
Interface Config
7.24 CoS (Class of Service) Command
7.24.1 Show Commands
7.24.1.1 show queue cos-map
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a specific
interface. The slot/port parameter is optional and is only valid on platforms that support independent
per-port class of service mappings. If sp ecified, the 802.1p mapping table of the interface is displayed. If
omitted, the most recent global configuration settings are displayed.
Syntax
show queue cos-map <slot/port>
< slot/port > - The interface number.
Default Setting
None
Command Mode
Privileged EXEC
User EXEC
Display Message
The following information is repeated fo r each user priority.
User Priority: The 802.1p user priority value.
Traffic Class: The traffic class intern al queue identifier to which the user priority value is mapped.