- 495 -
User EXEC
Display Message
IfIndex: This field displays the value of the interface used to reach the neighbor.
Nbr IP Addr: This field indi cates the IP Address of the DVMRP neig hbor for which this entry contains
information.
State: This field displays the state of the neighbori ng router. Th e possible value for this field
are ACTIVE or DOWN.
Up Time: This field indicates the time since this neighboring router was learned.
Expiry Time: This field indicates the time remaining for the neighbor to age out. This field is n ot
applicable if the State is DOWN.
Generation ID: This is the Generation ID value for the neighbor.
Major Version: This shows the major versi on of DVMRP protocol of neighbor.
Minor Version: This shows the minor versi on of DVMRP protocol of neighbor.
Capabilities: This shows the capabilities of neighbor.
Received Routes: Thi s sh ows the number of routes received from the neighb or.
Rcvd Bad Pkts: This field displays the number of invalid packets received from this neighbor.
Rcvd Bad Routes: This field displays the number of correct packets received with invalid routes.
9.1.1.4 show ip dvmrp nexthop
This command displays the next hop information on outgoing interfaces for routing multica st
datagrams.
Syntax
show ip dvmrp nexthop
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Source IP: This field displays the sources for which this entry specifies a next hop on an o utgoing
interface.
Source Mask: This field di splays the IP Mask for the sources for which this e ntry specifies a next hop
on an outgoing interface.
Next Hop Interface: This field displays the interface in slot/port format for the outgoing inte rface for
this next hop.
Type: This field states whether the network is a LEAF or a BRANCH.