- 528 -
9.6.2.3 ip pimsm register-threshold
This command is used to configure the Threshold rate for the RP router to switch t o the shortest path. The
rate is specified in Kilobits per second. The po ssible values are 0 to 2000.
Syntax
ip pimsm register-threshold <0 - 2000>
no ip pimsm register-threshold
<0 - 2000> - This is kilobits per seconds.
no - This command is used to reset the T hreshold rate for the RP router to switch t o the shortest path
to the default value.
Default Setting
0
Command Mode
Global Config
9.6.2.4 ip pimsm spt-threshold
This command is used to configure the Data Threshold rate for the last-hop router to switch to the shortest
path. The rate is specified in Kilobits per second. The possibl e values are 1 to 2000.
Syntax
ip pimsm spt-threshold <1 - 2000>
no ip pimsm spt-threshold
<1 - 2000> - This is kilobits per seconds.
no - This command is used to reset the Data Threshold rate for the last-hop router to switch to the
shortest path to the default value.
Default Setting
0
Command Mode
Global Config