- 146 -
WERR - Set ETS scheduler type to WERR
no - This command restores the scheduler type to WERR.
Default Setting
werr
Command Mode
Interface Config

7.2.17.7 queue ets weight

This command configures t he weight ratio of the two p riority groups (LAN and SAN) fo r an interface. The
sum of these two weight values sho uld meet 100 in percentage. The default weights are 50 to 50.
Syntax

queue ets weight <1-99> <1-99>

no queue ets weight

<1 - 99> - weight values.
no - This command restores the weight values to 50 and 50.
Default Setting
50(LAN), 50(SAN)
Command Mode
Interface Config

7.2.17.8 queue ets pg-mapping

This command configu res the mapping list of priority to priority grou ps. The range of priority id is from 0 to
7. The priority groups are LAN, SAN and IPC. This command let yo u assign priority id to specific priority
group. When the ETS is enabled, priority id 0 to 2 are assigned to LAN, priority 3 to 6 are assigned to
SAN, and priority 7 is assigned to IPC.
Syntax

queue ets pg-mapping {lan|san|ipc} [<0-7> [<0-7> [<0-7> [<0-7> [<0-7> [<0-7> [<0-7>]]]]]]]

no queue ets pg-mapping