- 462 -
Default Setting
-1
Command Mode
Router OSPF Config Mode
8.3.2.37 ip ospf authentication
ip ospf authentication command sets the OSPF Authentication Type and Key for the specified interface.
The value of <type> is either none, simple or encrypt. The <key> is comp osed of standard displayable,
non-control keystrokes from a Standard 101/102-key keyboard. The authentication key must be 8 bytes
or less if the authentication type is simple. If the type is encrypt, the key may be up to 16 bytes. If the type
is encrypt a <keyid> in the rang e of 0 and 255 must be specified. Unauthenticated interfa ces do not need
an authentication key or authentication key ID. There is no default value for this command.
no ip ospf authenticatio n comm and sets the default OSPF Authentication Type for the specified
interface.
Syntax
ip ospf authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no ip ospf authentication
Default Setting
None
Command Mode
Interface Config
8.3.2.38 ip ospf cost
ip ospf cost command configures the c ost on an OS PF int erface. The <cost> parameter ha s a range of
1 to 65535. no ip ospf cost command configures the default cost on an OSPF interface.
Syntax
ip ospf cost <1–65535>
no ip ospf cost
Default Setting
10
Command Mode
Interface Config