Fortinet 548B 7.4.2.14 spanning-tree uplinkfast , 7.4.2.15 spanning-tree guard {loop|none|root}

- 221 -
Default Setting
Disabled
Command Mode
Interface Config
7.4.2.14 spanning-tree uplinkfast
This command sets the Uplink Fast parameter to a new value on this switch. This command on ly works
on dot1d mode.
Syntax
spanning-tree uplinkfast
no spanning-tree uplinkfast
no - This command sets the Uplink Fast parameter to the default value, that is Disabled.
Default Setting
Disabled
Command Mode
Global Config
7.4.2.15 spanning-tree guard {loop|none|root}
This command sets the Gu ard Mode parameter to a new value on this interface.
Syntax
spanning-tree guard {loop|none|root}
no spanning-tree gu ard
loop –This command sets the Guard Mode to loop g uard on this interface.
none –This command sets the Guard Mode to non e.
root – This command sets the Guard Mode to root guard o n this interface.
no - This command sets the Guard Mode to the default value, that is none.
Default Setting
None
Command Mode
Interface Config