- 68 -
7.2.3.12 vlan makestatic
This command change s a dynamically created VLAN (one that is created by GVRP registratio n) to a
static VLAN (one that is permanently configured and defined). The ID is a valid VLAN identification
number. VLAN range is 2-3965.
Syntax
vlan makestatic <vlanid>
<vlanid> - VLAN ID (Range: 2 –3965).
Default Setting
None
Command Mode
VLAN database
7.2.3.13 protocol group
This command attaches a <vlanid> to the protocol-based VLAN identified by <group-name>. A group
may only be associated with one VLAN at a time, however the VL AN association can be changed.
Syntax
protocol group <group-name> <vlanid>
no protocol group <group-name> <vlanid>
<vlanid> - VLAN ID (Range: 1 –3965).
<group-name> - a VLAN Group Name (a character string of 1 to 16 characters).
no - This command removes the <vlanid> from this protocol-based VLAN group that is identified by
this <group-name>.
Default Setting
None
Command Mode
VLAN database
7.2.3.14 switchport acceptable-frame-type
This command set s the frame acceptance mode p er interface. For VLAN Only mode, untagge d frames or
priority frames received on this interface are discarded. For Admit All mode, untagged frames or priority