- 161 -
Default Setting
24
Command Mode
Line Config
7.3.3 Telnet Session Commands
7.3.3.1 telnet
This command establishes a new outbound telnet connection to a remote host.
Syntax
telnet <host> [port] [debug] [line] [echo]
<host> - A hostname or a valid IP address.
[port] - A valid decimal integer in the ra nge of 0 to 65535, where the default value is 23.
[debug] - Display current enable d telnet option s.
[line] - Set the outbound telnet operational mode as ‘linemode’, where by default, the operational
mode is ‘character mode’.
[echo] - Enable local echo.
Default Setting
None
Command Mode
Privileged Exec
User Exec
7.3.3.2 show line vty
This command displays telnet settings.
Syntax
show line vty
Default Setting
None