- 96 -
<slot/port> - Interface number.
Default Setting
None
Command Mode
Privilege Exec
Display Message
VLAN ID: Displays the list of VLANs of which the interface is a me mber.
Slot/Port: Shows the interface on which multica st rout er information is being displayed.
7.2.6.17 show ip igmp snooping static
The user can go to the Privilege Exec to display IGMP snooping static information, use the show ip igmp
snooping static Privilege command.
Syntax
show ip igmp snooping st atic
Default Setting
None
Command Mode
Privilege Exec
Display Message
VLAN: The VLAN ID used with the MAC address to fully identify packets you want L2Mcast Group.
MAC Address: The MAC address of the L2Mcast Group in the format 01:00:5e:xx:xx:xx.
Port: List the ports you want included into L2Mcast Group.
State: The active interface number belongs to this Multicast Group.
7.2.6.18 show mac-address-table igmpsnooping
The user can go to the CLI Privilege Exec to display the IGMP Snooping entries in the Multicast
Forwarding Database (MFDB) table, use the sho w mac-address-table igmpsnooping Privilege
command.
Syntax
show mac-address-tabl e igmpsnooping