- 348 -
no - This command removes the DHCP static entry from the DHCP Snooping database.
Default Setting
None
Command Mode
Global Config
7.18.2.8 ip dhcp snooping limit
This command control s the rate at which the DHCP Snooping messages come. T he default rate is 15 pps
with a range from 0 to 300 pps. The default burst level is 1 second with a range of 1 to 15 second s.
Syntax
ip dhcp snooping limit {rate <pp s> [burst interval <seconds>]}
no ip dhcp snooping limit
no - This command sets the rate at which the DHCP Snooping message s com e, and the burst level,
to the defaults.
Default Setting
15 pps for rate limiting and 1 sec fo r burst interval
Command Mode
Interface Config
7.18.2.9 ip dhcp snooping log-invalid
This command controls the logging DHCP messages filtration by the DHCP Snooping application.
Syntax
ip dhcp snooping log-invalid
no ip dhcp snooping log-in valid
no - This command disables the logging DHCP messages filtration by the DHCP Snooping
application.
Default Setting
Disabled
Command Mode