- 471 -
8.4.2.5 bootpdhcprelay serverip
This command configure s the se rver IP Address for BootP/DHCP Relay on the system.
Syntax
bootpdhcprelay serverip <ipaddr>
no bootpdhcprelay serverip
<ipaddr> - The IP address of the BootP/DHCP server.
no - Clear the IP address of the BootP/DHCP server.
Default Setting
None
Command Mode
Global Config
8.5 Routing Information Protocol (RIP) Commands
8.5.1 Show Commands
8.5.1.1 show ip rip
This command displays information relevant to the RIP router.
Syntax
show ip rip
Default Setting
None
Command Mode
Privileged Exec
Display Message
RIP Admin Mode: Select enable or di sable from the pulldown me nu. If you select enable RI P will be
enabled for the switch. The default is disabled.
Split Horizon Mode: Select none, simpl e or poison reverse from the pulldown m enu. Split horizon is
a technique for avoiding problem s caused by including routes in updates sent to the router from which
the route was originally learned. The options a re: None - no special processing fo r this case. Simple -
a route will not be included in updates sent to the router from which it was learned. Poisoned reverse