| Attachment | Attachment | |
| Knob | ||
|
| Power Shaft‡ | |
Hinged |
| Attachment | |
Hub Cover | ® | ||
|
| Housing | |
Attachment |
|
| |
Hub Socket | Notch | Pin | |
‡Not part of mixer. | |||
Attachment Shaft | |||
| |||
| Housing |
| |
General Instructions
To Attach
1.Turn speed control to OFF.
2.Unplug stand mixer.
3.Loosen attachment knob by turning it counterclockwise.
4.Flip up hinged hub cover.
5.Insert attachment shaft housing into attachment hub, making certain that attachment power shaft fits into square attachment hub socket. It may be necessary to rotate attachment back and forth. When attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim.
6.Tighten attachment knob by turning clockwise until attachment is completely secured to stand mixer.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
7.Plug into a grounded 3 prong outlet.
To Remove
1.Turn speed control to OFF.
2.Unplug stand mixer.
3.Loosen attachment knob by turning it counterclockwise. Rotate attachment slightly back and forth while pulling out.
4.Replace attachment hub cover. Tighten attachment knob by turning it clockwise.
12
