Lucent Technologies 6.0 Type line/trunk no.

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page3-153Optional Group Features
3
Console/Display Instructions Additional Information PC
Continue to assign the extension to another calling group or go to Step 10.
Select
Return to Step 7 to continue
programming. The next calling group is
displayed on Line 1.
Return to the System Programming menu.
Select three times.
Group Calling Line/Trunk or Pool Assignments 3
Use this procedure to assign or remove lines, trunks, or pools (Hybrid/ PBX o n ly)
that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling group.
To reassign a line/trunk or pool to a new calling group, you must remove it from its
old group before making the new assignment.
Summary: Group Calling Line/Trunk or Pool
Assignments 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Not applicable
Valid Entries Line, trunk, or pool number
Inspect Yes
Copy Option No
Console Procedure →More→ → →
Dial calling group ext. no.→ →Dial line/trunk no.→
→ → →
PC Procedure → → → →Type calling group ext. no.→
→Type line/trunk no.→→→→