Lucent Technologies 6.0 + or or Type no. of calls

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page3-179Optional Group Calling Features
3
Group Calling Calls-In-Queue Alarm Thresholds 3
Use this procedure to specify the number of calls that wait in the calling group
queue before group members are notified with either an external alert (an external
alert is turned on when the third threshold is met) or a light on the telephone.
Group members are notified when the number of calls waiting in the queue is
equal to or greater than the programmed thresholds as follows:
■First Threshold, flashing light
■Second Threshold, winking light
■Third Threshold, solid light
NOTE:NOTE:NOTE:
To configure only one threshold, set
all thresholds to the same number.
The LED states are off and on. To configure only two thresholds, set two of
the thresholds to be the same number, which has LED states off, flash, and
on.
Summary: Group Calling Calls-In-Queue Alarm
Thresholds 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Settings 1 call, for all Thresholds
Valid Entries 1 to 99
Inspect No
Copy Option No
Console Procedure →More→ → →
Dial calling group ext. no.→ → or
or →Drop→
Dialno. of calls→ → →
PC Procedure → → → →Type calling group ext. no.→
→ + →or or →Type no. of calls→
→ →