Polycom 7000 manual Edit Outbound Registration Dialog

Device Management

Edit Outbound Registration Dialog

Some external SIP peers require peer proxies to register with them as an endpoint does, using a REGISTER message. The Edit Outbound Registration dialog lets you edit the selected outbound registration configuration.

The following table describes the fields in the Edit Outbound Registration dialog.

Field	Description
Enabled	Clearing this check box lets you stop using this registration without deleting
	the registration information.
Address of record	The AOR with which the system registers (see registration rules in
	RFC 3261), such as:
	sip:1000@dma.polycom.com
Territory to perform registration	Responsibility for registering must be assigned to a territory, thus making the
	primary or backup RealPresence DMA cluster for the territory responsible,
	depending on which is active.
Contact address format	Select IP or DNS to specify that the contact header should use the virtual IP
	address or virtual DNS name of the cluster currently managing the territory. If
	the territory responsibility switches to the other cluster, it re-sends the
	registration using its IP address or DNS name.
	Select Free Form to specify that the contact header should use the FQDN
	you enter. The external peer must be able to resolve this FQDN.
User name	The user name to use for the authentication credentials if the external peer
	challenges the registration request.
	Note: The authentication credentials specified here are specific to this SIP
	peer and are not tied to any other authentication configuration values.
Password	The password to use for the authentication credentials if the external peer
Confirm password	challenges the registration request.
Request-URI	The Request-URI to include when registering with this SIP peer, specified
	using the variables (#delimited) defined in Free Form Template Variables.
Other headers	Additional headers to include when registering with this SIP peer.
	Click Add to add a header. In the Add Header dialog, specify the header
	name and value(s), using the variables (#delimited) defined in Free Form
	Template Variables.
	Click Edit or Delete to edit or delete the selected header.

See also:

External SIP Peer

Add External SIP Peer Dialog

Edit External SIP Peer Dialog

Polycom, Inc. 120