Polycom 7000 manual Lpr

Conference Manager Configuration

Field	Description
Encryption	Specifies the media encryption setting for conferences using this template:
	• No encryption — All endpoints join unencrypted.
	• Encrypt when possible — Endpoints supporting encryption join encrypted;
	others join unencrypted.
	• Encrypt all — Endpoints supporting encryption join encrypted; others can’t
	join.
	Note: VMR dial-outs to H.323 endpoints from an encrypted RealPresence
	DMA system conference are unsupported and will not connect.
	Note: Prior to v7.2, RMX MCUs supported only encryption settings of On and
	Off. If such an RMX is selected for a conference, the settings Encrypt when
	possible or Encrypt all are both converted to On.
	Consult the MCU’s Administrator’s Guide for the version in question for
	detailed information about media encryption (SRTP).
	Media encryption may be required in a maximum security environment.
LPR	Enables Lost Packet Recovery for conferences using this template. LPR
	creates additional packets containing recovery information that can be used to
	reconstruct packets lost during transmission.
TIP compatibility	Enables compatibility with Cisco’s Telepresence Interoperability Protocol,
	either for video only or for both video and content. Conferences can include
	both endpoints that don't support TIP and Cisco TelePresence® System
	(CTS) endpoints. If Prefer TIP is selected, TIP content is used for endpoints
	that support TIP, and non-TIP content is used with non-TIP endpoints.
	Requires minimum line rate of 1024 kbps and HD resolution (720 or better).
	Available only on v7.6 and newer Polycom MCUs.
MS AVMCU cascade	When integrated with a Lync 2013 environment, controls behavior of the
mode	cascade link with the Lync 2013 AVMCU.
	• Resource Optimized — The cascade link between the RealPresence DMA
	system and the Lync 2013 server’s AVMCU will be capable of HD video
	resolutions, which will increase MCU resource usage.
	• Video Optimized — The cascade link between the RealPresence DMA
	system and the Lync 2013 server’s AVMCU will be limited to SD video
	resolutions to conserve MCU resources.
FW NAT keep alive	Specifies that when receiving calls through an SBC, the MCU should send
	media stream keep-alive messages to the SBC at the interval specified.
Interval (seconds)	Specifies how often to send keep-alive messages.
Enable FECC	When checked, enable Far End Camera Control for conference participants.
Exclusive content mode	When checked, if a participant is broadcasting content, prevent other
	participants from interrupting with their own content while the current content
	stream is active.
Font for text over video	Allows you to specify the font type for text displayed to participants in a
(MPMx or newer)	conference. If using Default the system will display Heiti if a Chinese
	language is configured.
	Note: This property only applies when the MCU is configured for multilingual
	operation with Chinese (Simplified or Traditional) selected.
Polycom, Inc.	207