Polycom 7000 manual Juniper Networks SRC Integration Procedure, To configure SRC integration

Integrations with Other Systems

Juniper Networks SRC Integration Procedure

To configure SRC integration

1Go to Admin > Integrations > Juniper Networks SRC.

2Check Enable integration with Juniper Networks® SRC and specify the address of the SRC server.

3Specify the login credentials for the system to connect to the SRC server.

4Specify the subscriber URI of an endpoint known to the SRC server, specified as in this example: ip:ipAddress=192.168.70.228

This can be any endpoint about which the SRC server will return information when queried to test the connection.

5Click Update.

To verify that it can successfully communicate with the SRC server, the RealPresence DMA system queries the SRC server about the endpoint you specified and confirms that the query is successful. A dialog informs you that the configuration has been updated.

6Click OK.

See also:

Juniper Networks SRC Integration

Juniper Networks SRC Page

Polycom, Inc. 182