Polycom 7000 manual To edit an MCU

MCU Management

4To set aside some of the MCU’s capacity for non-DMA use, set Video ports reserved for non-DMA use and Voice ports reserved for non-DMA use to the desired values.

Note: MCUs and RealPresence Resource Manager systems

This feature is not for use with a Polycom RealPresence Resource Manager system. The RealPresence Resource Manager system must have exclusive use of any MCUs on which it directly schedules conferences. Those MCUs should not be added to the RealPresence DMA system’s conferencing resources.

5To use a gateway-capable MCU as an ISDN gateway, select the Enable gateway profiles check box and, on the Gateway Profiles tab, specify a dial string delimiter and add one or more session profiles.

6Click OK.

The new MCU appears in the MCUs list. If the MCU is configured as a conferencing resource, it’s placed into service.

7If the MCU is configured as a conferencing resource, add it to the desired MCU pool(s). See MCU Pools.

The pool(s) to which the MCU belongs, and the pool order(s) to which a pool belongs, are used to determine which MCU is used for a conference. See MCU Pool Orders.

To edit an MCU

1On the Dashboard, determine whether there are existing calls and conferences on the MCU you want to edit.

2Go to Network > MCU > MCUs.

3In the MCUs list, select the MCU of interest. If the MCU is being used as a conferencing resource, do the following:

a In the Actions list, select Busy Out. When prompted, confirm. b Wait for any existing calls and conferences to finish.

4In the Actions list, click Edit.

5In the Edit MCU dialog, edit the fields as required. See Edit MCU Dialog.

6To set aside more or fewer ports for non-DMA use, change the Video ports reserved for non-DMA use and Voice ports reserved for non-DMA use values.

Note: MCUs and RealPresence Resource Manager systems

This feature is not for use with a Polycom RealPresence Resource Manager system. The RealPresence Resource Manager system must have exclusive use of any MCUs on which it directly schedules conferences. Those MCUs should not be added to the RealPresence DMA system’s conferencing resources.

7To use a gateway-capable MCU as an ISDN gateway, select the Enable gateway profiles check box and, on the Gateway Profiles tab, specify a dial string delimiter and add or change session profiles. To stop using it, clear the Enable gateway profiles check box.

8Click OK.

Polycom, Inc. 141