Polycom 7000 manual Sipsrbruce@10.47.7.9

Call Server Configuration

Field	Description
Dial string	Enter a dial string to test. Then click Test. For SIP, the dial string should
	always specify the schema prefix (sip or sips). For example:
		sips:rbruce@10.47.7.9
Caller site	Select a site in order to set the four caller site variables:
	•	CALLER_SITE_NAME
	•	CALLER_SITE_DIGITS
	•	CALLER_SITE_COUNTRY_CODE
	• CALLER_SITE_AREA_CODE
	These variables can’t be set directly and are display only.
CALLER_H323ID	Test caller’s H323-ID or blank.
CALLER_E164	Test caller’s H.323 E.164 alias or blank.
CALLER_TEL_URI	Test caller’s SIP tel URI or blank.
CALLER_SIP_URI	Test caller’s SIP sip URI or blank.
VMR/Lync Conf ID	This field specifies the return value of the function
	“getConferenceRoomOrID()”, and is only populated when the dial rule
	simulates an outbound call to an endpoint from a conference based on a VMR
	or Lync conference ID.
	If the dial rule simulates a call to a VMR or Lync conference ID or a dial-in call,
	this field is blank.
Test route output	Displays the results of applying each rule (including its preliminary, if any) to
	the dial string.
	For instance, testing the dial string example shown above against the default
	dial plan might result in the following:
		#1:SipAlias[sips:rbruce@10.47.7.9] is not registered. H323-ID[rbruce]
		is not registered.
		#2:The room [rbruce] does not exist.
		#3:No entry queue is found.
		#4:Domain [10.47.7.9] is not within our administration.
		#5:The call was accepted by this dial rule.
Final result	Displays the final outcome of the dial rule processing. The final outcome for
	the example above would be:
		Transformed dial string is [sips:rbruce@10.47.7.9]. The call was
		accepted by dial rule #5.

See also:

Dial Rules

Add Dial Rule Dialog

Edit Dial Rule Dialog

Preliminary/Postliminary Scripting

Polycom, Inc. 242