Polycom 7000 manual Edit Devices Dialog

Device Management

Field	Description
Forward if busy	If the device is busy, forward calls to the specified alias.
	Registered endpoints can activate this feature by dialing the VSC for it (default is
	*74) followed by the alias. They can deactivate it by dialing the VSC alone.
Forward unconditionally	Forward all calls to the specified alias.
	Registered endpoints can activate this feature by dialing the VSC for it (default is
	*75) followed by the alias. They can deactivate it by dialing the VSC alone.
Alert when endpoint	If the device unregisters from the Call Server or its registration expires, an
unregisters	informational alert is triggered (see Alert 5003).

See also:

Endpoints

Add Alias Dialog

Edit Alias Dialog

Edit Devices Dialog

The Edit Devices dialog appears when you select multiple devices on the Endpoints page and click Edit Devices. It lets you change certain settings for multiple devices at a time.

The following table describes the parts of the dialog.

Field	Description
Device authentication	Indicates whether the selected devices must authenticate themselves.
	Note: Inbound authentication for the device type must be enabled at the system
	level (see Device Authentication), or the setting for these devices has no effect.
Permanent	Prevents the registration of the selected devices from ever expiring.
Class of service	Select to modify the class of service and the bit rate limits for calls to and from the
	selected devices.
	A call between two devices receives the higher class of service of the two.
	Note: The class of service of the device applies to point to point calls. VMR calls use
	the class of service of the conference room.
Maximum bit rate (kbps)	The maximum bit rate for calls to and from the selected devices.
Minimum downspeed bit	The minimum bit rate to which calls from the selected devices can be downspeeded
rate (kbps)	to manage bandwidth. If this minimum isn’t available, the call is dropped.
Alert when endpoint	If one of the selected devices unregisters from the Call Server or its registration
unregisters	expires, an informational alert is triggered (see Alert 5003).

See also:

Endpoints

Edit Device Dialog

Polycom, Inc. 96