Polycom 7000 manual Server Settings, Registration Policy, Command Description

Device Management

Column	Description
Registration Status	The registration status of the device:
	• Active — The device is registered and can make and receive calls.
	• Inactive — The device’s registration has expired. Whether it can make and
	receive calls depends on the system’s rogue call policy (see Call Server
	Settings) and. It can register again.
	• Quarantined — The device is registered, but it can’t make or receive calls.
	It remains in Quarantined or Quarantined (Inactive) status until you remove
	it from quarantine.
	• Quarantined (Inactive) — The device was quarantined, and its registration
	has expired. It can register again, returning to Quarantined status.
	• Blocked — The device is not permitted to register. It remains blocked from
	registering until you unblock it.
	If the device is in a site managed by the system, its ability to make and
	receive calls depends on the system's rogue call policy (see Call
	Server Settings).
	If the device is not in a site managed by the system, it can’t make or
	receive calls.
	A device’s status can be determined by:
	• An action by the device.
	• An action applied to it manually on this page.
	• The expiration of a timer.
	• The application of a registration policy and admission policy (see
	Registration Policy).
Exceptions	Shows any exceptions with which the device was flagged as a result of
	applying a registration policy.
Active Calls	Indicates if the device is in a call.
Device Authentication	Indicates whether the endpoint must authenticate itself.
	Note: Inbound authentication for the device type must be enabled at the
	system level (see Device Authentication), or the setting for the device has no
	effect.

The Actions list associated with the Endpoints list contains the items in the following table.

Command	Description
View Details	Opens the Device Details dialog for the selected endpoint.
Add	Opens the Add Endpoint dialog, where you can manually add a device to the
	system.
Edit	Opens the Edit Endpoint dialog for the selected endpoint, where you can change
	its information and settings. If multiple endpoints are selected, opens the Edit
	Endpoint dialog, where you can change the device authentication, permanent
	registration, and class of service settings.

Polycom, Inc. 91