Polycom 7000 manual Policy, Command Description

MCU Management

Column	Description
Registration Status	The registration status of the device with the Call Server:
	• Active — The device is registered and can make and receive calls.
	• Inactive — The device’s registration has expired. Whether it can make and
	receive calls depends on the system’s rogue call policy (see Call Server Settings).
	It can register again.
	• Permanent — The device’s registration never expires.
	• Quarantined — The device is registered, but it can’t make or receive calls until
	you remove it from quarantine.
	• Quarantined (Inactive) — The device was quarantined, and its registration has
	expired. It can register again, returning to Quarantined status.
	• Blocked — The device is not permitted to register. Whether it can make and
	receive calls depends on the system’s rogue call policy. It remains blocked from
	registering until you unblock it.
	A device’s registration status can be determined by:
	• An action by the device.
	• An action applied to it manually on this page.
	• The expiration of a timer.
	• The application of a registration policy and admission policy (see Registration
	Policy).
Exceptions	Shows any exceptions with which the device was flagged as a result of applying a
	registration policy.
MCU Pools	The MCU pools in which this MCU is used, if it’s enabled for conference rooms
	(available as a conferencing resource for the Polycom RealPresence DMA system’s
	Conference Manager).
Site	The site in which the MCU is located (see Sites).

The Actions list associated with the MCU list contains the items in the following table.

Command	Description
View Details	Opens the Device Details dialog for the selected MCU.
Add	Opens the Add MCU dialog, where you can add an MCU to the pool of devices
	known to the Polycom RealPresence DMA system.
Edit	Opens the Edit MCU dialog for the selected MCU, where you can change its
	information and settings.
Delete	Removes the selected MCU from the pool of devices that are available to the
	Polycom RealPresence DMA system as conferencing resources. A dialog asks you
	to confirm.
	You can’t delete an MCU if:
	• The MCU is hosting one or more conferences. Busy out the MCU and wait for all
	conferences to end.
	• The MCU is registered with the Call Server. Unregister the MCU.

Polycom, Inc. 129