Not to make or receive calls | Polycom 7000 manual

MCU Management

Command	Description

Start Using	Enables the Polycom RealPresence DMA system to start using the selected MCUs
	as conferencing resources or ISDN gateways (for simplified gateway dialing).
	This command only affects Conference Manager and simplified gateway dialing
	functionality. It doesn’t affect MCUs that are simply registered with the Call Server.

Stop Using	Stops the Polycom RealPresence DMA system from using the selected MCUs as
	conferencing resources or ISDN gateways. A dialog asks you to confirm. If you do
	so, existing calls on the MCUs are terminated or (for SIP calls only) migrated to
	in-service MCUs with available capacity.
	If any of the MCUs are ISDN gateways, the system stops using them for simplified
	gateway dialing.
	This command immediately terminates the system’s use of the MCUs as
	conferencing resources or ISDN gateways. It has no effect on the MCUs
	themselves, which continue to accept any calls from other sources.

Busy Out	Stops the Polycom RealPresence DMA system from creating new conferences on
	the selected MCUs, but allows existing conferences to continue and accepts new
	calls to those conferences. If any of the MCUs are ISDN gateways, the system stops
	using them for simplified gateway dialing. A dialog asks you to confirm.
	This gracefully winds down the system’s use of the MCU. It has no effect on the
	MCUs themselves, which continue to accept any calls from other sources.

Quarantine	Allows the selected MCUs to register (or remain registered) with the Call Server, but
	not to make or receive calls.
	If the MCUs are quarantined, this becomes Unquarantine.
	Note: Quarantining is intended only for MCUs that are registered with the Polycom
	RealPresence DMA system’s Call Server as standalone MCUs and/or ISDN
	gateways, but are not available to the Conference Manager as conferencing
	resources.
	Quarantining does not prevent VMR calls to MCUs configured as conferencing
	resources.
	Quarantining an MCU that’s both registered with the Call Server and configured as a
	conferencing resource for the Conference Manager may have unpredictable results.

Block Registrations	Prevents the selected MCUs from registering with the Call Server.
	If the MCUs are blocked, this becomes Unblock Registrations.

View Call History	Use the Reports > Call History page to view calls for the selected MCU.

Polycom 7000 manual Not to make or receive calls

Models: 7000

Command

not to make or receive calls.