Configure Signaling, To configure signaling | Polycom 7000 instruction

Local Cluster Configuration

4Click Update.

A dialog informs you that the licenses have been updated.

5Click OK.

Add Licenses to the RealPresence DMA system, Virtual Edition

The RealPresence DMA system, Virtual Edition, is deployed and licensed through Polycom RealPresence Platform Director. You can view the licensing information for your system from the RealPresence DMA system user interface on the Admin > Local Cluster > Licenses page.

See the RealPresence Platform Director System Administrator’s Guide for more information.

Note: Local cluster not supported with virtual edition

The RealPresence DMA Virtual Edition does not support a two-server local cluster configuration. However, superclustering of individual RealPresence DMA Virtual Edition instances is fully supported in a virtual environment.

See also:

Licenses

Configure Signaling

To configure signaling

1Go to Admin > Local Cluster > Signaling Settings.

2To make the system accessible via H.323 calls: a Select Enable H.323 signaling.

b Leave the default port numbers (1720 for H.225, 1719 for RAS) unless you have a good reason for changing them.

c Select H.323 multicast to support gatekeeper discovery messages from endpoints.

dTo turn on H.235 authentication, select Enable H.323 device authentication.

Device authentication credentials must be added on the Inbound Authentication tab of the Device Authentication page. Click the Device authentication settings link to go directly there.

3To make the system accessible via SIP calls: a Select Enable SIP signaling.

b To enable pass-through of ANAT signaling (RFC 4091 and RFC 4092) in the Session Description Protocol (SDP) for the purpose of negotiating IP version in a dual-stack (IPv4 + IPv6) environment, select Enable ANAT support.

cIf the system’s security settings permit unencrypted SIP connections, optionally set Unencrypted SIP port to TCP or UDP/TCP.

You must have the Administrator role to change security settings. See Security Settings.

Polycom, Inc.

81

Image 81

Polycom 7000 manual Configure Signaling, To configure signaling, Go to Admin Local Cluster Signaling Settings

Contents

Polycom RealPresence DMA 7000 System Page Contents System Security Local Cluster Configuration Device Management Integrations with Other Systems MCU Management Superclustering Conference Manager Configuration Site Topology Call Server Configuration Users and Groups System Management and Maintenance Contents 361 Polycom RealPresence DMA System Snmp Support System Reports Introduction to the Polycom RealPresence DMA System Polycom RealPresence DMA System’s Primary FunctionsConference Manager RealPresence Platform API Call Server SVC Conferencing Support Two-server Cluster Configuration Polycom RealPresence DMA System’s Three Configurations Single-server Configuration System Capabilities and Constraints System Port Usage SettingsPort Protocol Description Embedded DNS Send Usage Data Accessing the Polycom RealPresence DMA System Polycom Solution SupportWorking in the Polycom RealPresence DMA System Field Input Requirements Menu/Icon Admin Provisioner Auditor Settings Dialog Menu/Icon Admin Provisioner Auditor Menu/Icon Admin Provisioner Auditor Menu/Icon Admin Provisioner Auditor License Information Open Source SoftwareModifying Open Source Code To replace an Lgpl library with your modified version Confirming configuration System configuration Additional DNS Records for SIP Proxy Additional DNS Records for the H.323 Gatekeeper Additional DNS Records for the Optional Embedded DNS Feature License the Polycom RealPresence DMA System Verify That DNS Is Working for All AddressesLicense the RealPresence DMA System, Appliance Edition License the RealPresence DMA System, Virtual Edition Set Up Signaling Set Up Security Set Up MCUs Connect to Microsoft Active Directory Set Up Conference Templates Test the System How Certificates Work Security Certificates Overview DER System Security Frequently Asked Questions Column Description Certificate Settings Certificate Information Dialog Certificate Signing Request DialogField Description Add Certificates Dialog Certificate Details DialogSection Description Install a Certificate Authority’s Certificate Certificate ProceduresTo install a certificate for a trusted root CA Go to Admin Local Cluster Certificates Actions list, select Add Certificates To create a certificate signing requestActions list, select Display Details Actions list, select Create Certificate Signing Request Install a Certificate in the RealPresence DMA System To remove a Trusted Root CA’s certificate Remove a Certificate from the RealPresence DMA System Security Settings Actions list, select Delete CertificateCertificate Details dialog appears Field Description Maximum security High securityCustom security Servers, not to allow ongoing use of unencrypted connections Server in the Polycom RealPresence DMA system Go to Admin Local Cluster Security Settings To change the security settings On the Troubleshooting Utilities menu, Top is removed Consequences of Enabling Maximum Security Mode System Security Login Policy Settings Field Description Password Management Local PasswordPassword Complexity Session Unlimited Local User AccountField Description Account Lockout Account Inactivity Access Policy Settings BannerCustom To reset system passwords Reset System Passwords Wait a few minutes to log back in. See also Network Settings Local Cluster Configuration Field Description Dhcp Server Settings Field Description Shared Management NetworkTurn on Auto-negotiation or set Speed and Duplex manually General System Network Shared Signaling Network IPv6address%eth0 Routing Configuration Dialog Time Settings Licenses for the Appliance Edition LicensesField Description Active License Activation Keys Licenses for the Virtual Edition Cluster Network SettingsSee Automatically Send Usage Data for more information DMA Host SIP Signaling Signaling Settings Device Authentication SIP Device AuthenticationUntrusted SIP Call Handling Configuration Field Description Settings Signaling Settings Fields SIP Settings Field Add Guest Port Dialog Edit Guest Port Dialog Security Settings page. See Security Settings Add Guest Prefix Dialog Edit Guest Prefix Dialog Logging Settings Alerting Settings Local Cluster Configuration Procedures Add LicensesAlert ID Threshold Condition Description To request a software activation key code for each server Go to Admin Local Cluster LicensesTo enter license activation key codes Select Product Activation Configure Signaling To configure signalingGo to Admin Local Cluster Signaling Settings Under Unauthorized prefixes, click Add Under Unauthorized ports, click Add Configure Logging To configure loggingAutomatically Send Usage Data Enable or Disable Automatic Data Collection See the Collected DataTo see the collected data Active Calls Device Management Call Details Dialog Tab/Field/Column Description Call Info Tab/Field/Column Description Bandwidth On the Call Server SettingsCall Events Subscription Events Endpoints Tab/Field/Column Description Property ChangesQoS Registration policy script see Registration Policy Server Settings Command DescriptionRegistration Policy Registrations Names/Aliases in a Mixed H.323 and SIP Environment Device Management Add Endpoint Dialog Edit Device Dialog Edit Devices Dialog Add Alias Dialog Site StatisticsEdit Alias Dialog Associate User Dialog Site Link Statistics Column External Gatekeeper Authentication Mode Add External Gatekeeper DialogColumn Description External Gatekeeper Postliminary Edit External Gatekeeper Dialog This script to open the Script Debugging Dialog for Multiple External SIP Peers External SIP Peer Field Description External SIP Peers Add External SIP Peer Dialog UDP Domain List Field Description Postliminary AuthenticationTemporarily select Use customized script To header options Lync Integration Edit External SIP Peer Dialog External RegistrationsField Description External SIP Peer Host/domain name Routed to this peer server Polycom, Inc 112 Lync Integration SIP Peer Postliminary Output Format Options To Header Format OptionsExternal Registration Request-URI Header Format Options Default To header for Microsoft. Equivalent to template Default Request-URI for Microsoft Equivalent to template Free Form Template VariablesVariable Description To Header and Request-URI Header Examples Original To Header Template ResultOriginal Request-URI Header Template Result Edit Authentication Dialog Add Authentication Dialog Template Variables Add Outbound Registration Dialog Edit Outbound Registration Dialog External H.323 SBC Column Description External H.323 SBC Add External H.323 SBC Dialog Edit External H.323 SBC Dialog Polycom, Inc 124 MCUs MCU ManagementPage Polycom, Inc 127 See SVC Conferencing Support Policy Not to make or receive calls Field Description External MCU Add MCU Dialog Management IP address Gateway Selection Process Prefix Dialog Media IP Addresses Gateway Profiles Edit MCU Dialog Management IP address Polycom, Inc 137 Polycom, Inc 138 Edit Session Profile Dialog Add Session Profile Dialog Isdn Gateway Selection Process MCU ProceduresTo view information about an MCU To add an MCU To edit an MCU To delete an MCU MCU Pools Command Add MCU Pool DialogEdit MCU Pool Dialog To add an MCU Pool MCU Pool ProceduresTo edit an MCU Pool To delete an MCU Pool MCU Pool Orders Add MCU Pool Order Dialog MCU Selection Process Edit MCU Pool Order Dialog MCU Availability and Reliability Tracking 24% To view the MCU Pool Orders list MCU Pool Order ProceduresTo add an MCU Pool Order To edit an MCU Pool Order To delete an MCU Pool Order Microsoft Active Directory Integration Integrations with Other Systems Microsoft Active Directory Field Description Connection Status Field Description Active Directory Connection Conference Settings Enterprise Conference Room ID Generation Understanding Base DN Enterprise Chairperson and Conference Passcode Generation To integrate with Active Directory Active Directory Integration Procedure Polycom, Inc 160 Understanding Base DN Polycom, Inc 162 Adding Passcodes for Enterprise Users About the System’s Directory Queries When you click Update on the Microsoft Active Directory User Search Group SearchGlobal Group Membership Search Configurable Attribute Domain Search Attribute Replication SearchDomain Search Microsoft Lync 2013 Integration Service Account Search Scheduled Conferences with Polycom RealConnect Lync 2010 vs. Lync 2013 Integration Active Directory Service Account Permissions Automatic Contact Creation and Configuration Considerations and Requirements for Lync 2013 Integration Lync and non-Lync Endpoint Collaboration Integrate RealPresence DMA and Lync Lync 2010 and 2013 Client / Server Feature Support Microsoft Exchange Server Integration Diagnose Presence Problems Polycom Solution and Integration Support Differences between Calendaring and SchedulingMicrosoft Exchange Server Exchange Server Integration Procedure RealPresence Resource Manager Integration Page RealPresence Resource Manager Join RealPresence Resource Manager Dialog RealPresence Resource Manager Integration Procedures To integrate with a RealPresence Resource Manager system Juniper Networks SRC Juniper Networks SRC Integration To configure SRC integration Juniper Networks SRC Integration Procedure Conference Settings Conference Manager Configuration Presence Publishing Contacts presence settings below Create Polycom conference contacts check box is enabledField Maximum Polycom conference contacts to publish Default Polycom Conference Contacts Presence Settings Class of Service To specify conference settings Go to Admin Conference Manager Conference SettingsRemove Contacts from Active Directory Dialog Conference Templates Two Types of TemplatesSelect Publish presence for Polycom conference contacts Standalone Templates Template Priority About Conference IVR Services Cascading for Bandwidth Cascading for Size About Cascading Cascading for Bandwidth Cascading for Size RMX General Settings Field Description Common SettingsConference Templates List Add Conference Template Dialog Many of the MCUs have that profile for instance, 2 Cascade for bandwidth LPR Field Description RMX Gathering Settings Video switching is selectedRMX Video Quality RMX Video Settings  Conference mode is set to AVC only TIP compatibility is set to either None or Video Only Optimized Guide Telepresence mode is Yes RMX Skins Field Description RMX Audio SettingsRMX Conference IVR See Shared Number Dialing RMX Recording RMX Site Names Cisco Codian Edit Conference Template Dialog Polycom, Inc 205 Field Description LPR Field Description RMX Gathering Settings  Conference mode is set to AVC only Polycom, Inc 210 Polycom, Inc 211 RMX Site Names Cisco Codian Go to Admin Conference Manager Conference Templates Conference Templates ProceduresSelect Layout Dialog To select a video frames layout To edit a conference template Click the RMX General Settings tabTo change a conference template’s priority To delete a conference template IVR Prompt Sets Prompt File Name Prompt Text Shared Number Dialing Polycom, Inc 219 Polycom, Inc 220 Add Virtual Entry Queue Dialog Conference Settings plus VEQ numberField Description Virtual Entry Queue Prompt Sets Edit Virtual Entry Queue Dialog Add Direct Dial Virtual Entry Queue Dialog Edit Direct Dial Virtual Entry Queue Dialog Dialstring = sipxxx@10.33.120.58 Script Debugging Dialog for VEQ Scripts Sample Virtual Entry Queue Script About Superclustering Superclustering DMAs Polycom, Inc 228 Following table describes the fields on Join Supercluster Dialog To create or join a supercluster Supercluster Procedures Actions list, select Remove from Supercluster To remove a cluster from the supercluster About the Call Server Capabilities Call Server Configuration Call Server Settings Field Description General SettingsModifications For the called endpoint For SIP calls gatewayed to an See External Gatekeeper Domains Field Description Gatekeeper Blacklist Settings Mycompany domains, this would not match eng.mycompany.com Dial Rules Test Dial Rules Dialog Sipsrbruce@10.47.7.9 Default Dial Plan and Suggestions for Modifications Rule EffectSee Edit Site Dialog Polycom, Inc 244 H323xxxx@enterprisepartner.com Add Dial Rule Dialog Field Description Dial RulePreliminary Default port of the signaling protocol Conference Manager Conference Settings Template configured in Admin Conference Manager ConferenceConference template MCU pool order All in parallel forking Weighted round-robin Edit Dial Rule Dialog Block Blocks the call Resolve to IP address Polycom, Inc 252 Polycom, Inc 253 Preliminary/Postliminary Scripting Predefined Preliminary/Postliminary Scripting VariablesVariable Initial value Usage example Preliminary/Postliminary Scripting Functions Function name and parameters Details Return valueReturn value None Dial rule action Output SIP headers How Dial Rule Actions Affect SIP Headers See Preliminary/Postliminary Scripting for a description Script Debugging Dialog for Preliminaries/Postliminaries Dialstring = 99 + Dialstring Strip Prefix SIP Sample Preliminary and Postliminary Scripts Substitute Domain SIP Site Based Numeric Nicknames User = Callersitecountrycode + Callersiteareacode + user Hunt Groups Edit Hunt Group Dialog Add Hunt Group DialogField Description General Info Hunt Group Members Device Authentication Shared Outbound Authentication Inbound AuthenticationOn the Inbound Authentication tab, you can Field Description Inbound Authentication Shared Outbound Authentication Add Device Authentication Dialog Edit Device Authentication Dialog Field Description Device AuthenticationRegistration Policy Compliant Epdefinedincma Registration Policy Scripting EPISIPV4 Regsitedigits Script Debugging Dialog for Registration Policy Scripts Sample Registration Policy Scripts Reject aliases that arent the right length otherwise accept Prefix Service Add Simplified Isdn Gateway Dialing Prefix Dialog Edit Simplified Isdn Gateway Dialing Prefix Dialog Embedded DNS Edit Vertical Service Code Dialog Callservers.example.com To enable DNS publishing History Retention Settings Record Type Retention Limit When Limit Is ReachedNumber of Records Purged History Report To configure history record retention About Site Topology Site Topology Bandwidth Management Sites Field Site Info Site Information Dialog Add Site Dialog Field Description General Info General SettingsDevice Types Subnets Field Description Bandwidth Settings Territory SettingsIsdn Number Assignment Isdn Range Assignment for did dialing method Isdn Outbound Dialing Isdn Range Assignment for gateway extension dialing method RoutingSIP Routing Subnet2 = 10.33.24.0/24 Edit Site Dialog Polycom, Inc 291 Override ITU dialing rules Subnet Name Unique name of the subnet Polycom, Inc 293 Add Subnet Dialog Edit Subnet Dialog Site Links Edit Site Link Dialog Add Site Link Dialog Add Site-to-Site Exclusion Wizard Site-to-Site Exclusions Territories To add a site-to-site exclusionGo to Network Site Topology Site-to-Site Exclusions Add Territory Dialog Edit Territory Dialog Network Clouds Add Network Cloud DialogField Cloud Info Field Description Associated Sites Edit Network Cloud DialogAdd Site Link Dialog Field Cloud Info Description Site Topology Configuration Procedures Go to Network Site Topology SitesGo to Network Site Topology Territories About Site Topology Role Description User Roles Overview Adding Users Overview Users Are in the Local domain Add User Dialog See Local PasswordSee Add User Dialog Dialog Service. See Conference Settings Rooms DialogAssociated Endpoints Edit User Dialog Field Description Associated RolesConference Passcodes Prompted see Authentication Required Dialog Select Associated Endpoints Dialog Field Description Associated Endpoints Authentication Required Dialog Select Associated Endpoints DialogConference Rooms Dialog Its conferences. See Conference Templates Add Conference Room Dialog Conference Settings Namespace, enter the value in the box below the list  Publish presence Defined on the Admin Conference Manager Conference Settings Do not publish presence  Create contact and publish presence User Dialog Conference see Edit Conference Template Dialog Edit Conference Room Dialog Settings Polycom, Inc 324 Dial-out Participants list Users Procedures Add Dial-out Participant DialogEdit Dial-out Participant Dialog To add a local user To find a user or usersTo edit a user Go to User Users To delete a local user Conference Rooms ProceduresTo add a conference room to a user To edit one of a user’s conference rooms To delete one of a user’s custom conference rooms Groups Conference Templates Import Enterprise Groups Dialog See Conference SettingsEdit Group Dialog From the Search results box Templates Manager Conference Settings Admin Conference Manager Conference SettingsSetting on the User Users Manage Conf Rooms dialog Boxes on the Admin Conference Manager Conference Settings Actions list, click Import Enterprise Groups Enterprise Groups Procedures To terminate a user’s login session Login Sessions Change Password Dialog Administrator Responsibilities Management and Maintenance Overview Administrative Best Practices Auditor ResponsibilitiesAuditor Best Practices Regular archive of backups Recommended Regular MaintenanceProvisioner Responsibilities General system health and capacity checks Microsoft Active Directory health Dashboard Security configurationCertificates Network usage data export Call Server Active Calls Pane Active Directory Integration Pane Call Server Registrations Pane Cluster Info PaneConference History Max Participants Pane Conference Manager Usage Pane Conference Manager MCUs Pane Juniper Networks SRC Integration Pane Exchange Server Integration Pane License Status Pane Signaling Settings PaneRealPresence Resource Manager Integration Pane Supercluster Status Pane Territory Status Pane User Login History Pane Alerts Supercluster Status AlertCluster cluster is orphaned No clusters assigned to list of territories Territory Status Polycom, Inc 351 Asynchronous Operation RealPresence Resource Manager System IntegrationFormatted string from server Zero enterprise conference rooms exist on cluster cluster Active Directory Integration Polycom, Inc 354 Exchange Server Integration Database Status Lync Integration Signaling Certificate Cluster cluster The server certificate has expiredCertificates. See also Cluster cluster One or more CA certificates have expired Cluster cluster Cannot connect to licensing server lserver Licenses Cluster cluster DMA is not licensed for any calls Networks Cluster cluster a private network error exists on server Cluster cluster a public network error exists on serverCluster cluster a signaling network error exists on server Server Resources Server server CPU utilization 50% and 75% Data Synchronization Server server CPU utilization 75%Cluster cluster System version differs between servers Cluster cluster Local users differ between servers System Health and Availability MCUs MCU MCUname is currently out of service MCU MCUname is currently busied outMCU MCUname has count warnings MCU mcu disconnect rate is 1 MCU MCUname is disconnectedMCU mcu disconnect rate is MCU mcu call failure rate is 0.4 MCU mcu is connected with no port capacity MCU mcu call failure rate is Endpoints Polycom, Inc 373 No territories configured to host conference rooms Conference ManagerConference Status Lync Presence Publishing Conference VMR on MCU MCU failed to start reasonOngoing conference VMR on MCU MCU failed reason Polycom, Inc 376 Polycom, Inc 377 Call Server System Log Files Call Bandwidth ManagementCluster cluster External SIP peer sippeer is unresponsive To download a log archive to your PC or workstation System Logs Procedures To manually roll the system logs To delete a system log archiveActions list, click Download Archived Logs Ping Troubleshooting UtilitiesTraceroute Top NTP Status Check Configuration SynchronizationTo run iostat on each server To run sar on each server Diagnostics for your Polycom Server To check configuration synchronizationBacking Up and Restoring SHA1 Backup and Restore Procedures Confirm Restore Dialog To create a new backup file To download a backup fileTo upload a backup file Go to Maintenance Backup and Restore To restore from a backup file on the cluster Shut down the system. See Shutting Down and Restarting Close the utility Upgrading the Software Following table describes the parts of the Software Upgrade Basic Upgrade Procedures To install an upgrade Go to Maintenance Software UpgradeReturn to Maintenance Software Upgrade To roll back an upgrade, restoring the previous version Return to Maintenance Software Upgrade Incompatible Software Version Supercluster Upgrades Factors to Consider for an Incremental Supercluster Upgrade Simplified Supercluster Upgrade Complete Service Outage System Management and Maintenance Polycom, Inc 400 RealPresence DMA System, Virtual Edition System Upgrade Complex Supercluster Upgrade Some Service MaintainedTo upgrade a RealPresence DMA system, Virtual Edition Adding a Second Server Expanding an Unpatched System Expanding a Patched System Replacing a Failed Server Shutting Down and RestartingTo replace a failed server in a two-server cluster Go to Maintenance Shutdown and Restart To restart or shut down one or both servers in a clusterTo start up a shut-down cluster Call History Alert History System Reports Export History Conference History Associated Calls Export History Property Changes Conference Events Exporting CDR Data Call Detail Records CDRsCall Record Layouts To download CDRs YYYY-MM-DDTHHMMSS.FFF+-ZHHMM 1024+768+384 486BUSY Here Conference Room Dialog 720p30 Conf Conference Record Layouts Value from the Conference room pass-through to CDR field Polycom RealPresence DMA System Registration History Report To find a device or devices Registration History Procedures Active Directory Integration Report Active Directory Integration All DomainsGroups with Partially Loaded or No Membership Information Orphaned Groups and Users Report Orphaned Groups and Users ProceduresTo remove orphaned group data from the system To remove orphaned user data from the system Conference Room Errors Report To download conference room errors data Exporting Conference Room Errors Data Enterprise Passcode Errors Report Exporting Enterprise Passcode Errors Data To download enterprise passcode errors dataNetwork Usage Report Exporting Network Usage Data Field Description To download network usage data Snmp Framework Snmp Overview Snmp Versions Snmp Notifications Enable the Snmp Agent Configure SnmpTo enable the Snmp agent Go to Admin Local Cluster Snmp Settings Go to Admin Local Cluster Snmp Settings Click Add User Add an Snmp Notification UserTo add a notification user Edit Notification User Dialog Add an Snmp Notification AgentTo add an Snmp notification agent to the system Edit Notification Agent Dialog Click Add AgentUDP. See Snmp Overview Download MIBs Go to Admin Snmp Settings Click Download MIBsAvailable Snmp MIBs To download the MIB package for a DMA system Polycom RealPresence DMA System Snmp Support