Polycom 7000 manual Registration History Report

System Reports

Field	Description
mcuNameList	The MCU(s) used by the conference. If there is more than one (due to
	cascading or an MCU failover), this is a comma-separated list enclosed in
	quotes.
	If the conference was cascaded, the hub MCU is listed first. If there was a
	failover, the original MCU is listed first.
confDisplayNameList	The conference display name of the conference as it appears on the MCU. If
	there is more than one MCU (due to cascading or an MCU failover), this is a
	comma-separated list enclosed in quotes.
	If the conference was cascaded, the display name from the hub MCU is listed
	first. If there was a failover, the display name from the original MCU is listed
	first.
	This information is included to support the correlation of RealPresence DMA
	CDRs with CDRs on the MCU. Polycom MCUs use the conference display
	name as part of the name of the CDR file for a conference.
chairPasscode	The configured chairperson passcode for the conference room. Blank if no
	passcode was configured at the time of the conference.
confRequiresChair	TRUE if the conference template used for the conference has the
	Conference requires chairperson check box enabled. Otherwise, FALSE.
termConfAfterChairDrops	TRUE if the conference template used for the conference has the Terminate
	conference after chairperson drops check box enabled. Otherwise, FALSE.
charJoinTime	The time that the first chairperson joined the conference. If no chairperson
	joined the conference, blank.

See also:

System Reports

Call History

Conference History

Registration History Report

If the Polycom RealPresence DMA system Call Server is providing H.323 gatekeeper or SIP registrar services, the Registration History page provides access to information about registered devices. It also provides information about external SIP peers with which the system is registered, if any.

The search pane above the list lets you find registrations matching the criteria you specify. Click the down arrow to expand the search pane. You can search for a device by its alias or IP address. You can limit your search by specifying one or more of the following:

●Owner, territory, or site.

●Signaling protocol (H.323 or SIP).

●Registration status.

●Device type (endpoint or gateway).

The start and end time options provide complete flexibility in defining the time range in which you’re interested, letting you specify registration start time criteria, registration end time criteria, or both. When

Polycom, Inc. 418