Polycom 7000 Conference template, Template configured in Admin Conference Manager Conference

Call Server Configuration

For this action:	The system attempts to resolve the address as follows:
Resolve to Lync conference	Queries an integrated Lync SIP peer for a Lync AVMCU-based conference with a
ID	matching conference ID. This dial rule action enables Polycom RealConnectTM
	functionality. See Scheduled Conferences with Polycom RealConnect™.
	When selected, the following fields are available:
	•	Conference template
		When checked, you can select the conference template used to start the
		conference. If you leave this option unchanged, the Default conference
		template configured in Admin > Conference Manager > Conference
		Settings will be used. Keep in mind that the conference template must specify
		a Conference mode of AVC only, or the conference will not start. See
		Considerations and Requirements for Lync 2013 Integration.
	•	MCU pool order
		Select the MCU pool order to use for MCUs that provide Lync AVMCU cascade
		functionality. If you leave this option unchecked, the dial rule will use the default
		pool order configured in the Default MCU pool order field on the Admin >
		Conference Manager > Conference Settings page.
	• Available SIP peers / Selected SIP peers selection area
		This area lists the names of Available SIP peers and any Selected SIP peers.
		With the provided arrow buttons, you can move SIP peers between the
		Available and Selected areas. When the dial rule is executed, the system will
		query the selected SIP peers to find which one is hosting the Lync conference.
		Note: For an external SIP Peer to be listed in the Available SIP peers area, it
		must be listed on the Network > External SIP Peers page and have the
		following configuration:
		 A Type of Microsoft
		 The Enable RealConnectTM conferences check box selected in the Lync
		Integration tab
	Note: Polycom recommends ordering this rule so that it appears before any rule
	with the action Resolve to external SIP peer. If the Resolve to external SIP peer
	dial rule doesn’t successfully route a call, the call is aborted and no subsequent dial
	rules will be attempted. Polycom also recommends that this rule not appear higher
	than its default order in the list of dial rules, because this can prevent valid aliases,
	VMRs, and VEQs from being dialed and can result in reduced system
	performance.
Resolve to service prefix	Looks for a service prefix that matches the beginning of the dial string (not counting
	the URI scheme, if present).
	Note: For a SIP peer, the dial string must either include the protocol or consist of
	only the prefix and user name (no @domain). For instance, if the SIP peer’s prefix
	is 123, the dial string for a call to alice@polycom.com must be one of the following:
		sip:123alice@polycom.com
		123alice

Polycom, Inc. 248