Polycom 7000 manual Add Endpoint Dialog, Field Description

Device Management

See also:

Device Management

Add Endpoint Dialog

Edit Device Dialog

Associate User Dialog

Active Calls

Add Endpoint Dialog

The Add Endpoint dialog lets you manually add a device to the system.

When you add an endpoint manually, the system applies its registration policy script (see Registration Policy) to determine the device’s compliance level (compliant or noncompliant with the policy), and then applies the admission policy associated with that result to determine the registration status of the device.

The following table describes the parts of the dialog.

Field	Description
Device type	The device’s signaling protocol (H.323 or SIP).
Signaling address	For an H.323 device, the H.225 call signaling address and port of the device. Either
	this or the RAS address is required.
RAS address	For an H.323 device, the RAS (Registration, Admission and Status) channel address
	and port of the device.
Aliases	For an H.323 device, lists the device’s aliases. When you’re adding a device, this list
	is empty. The Add button lets you add an alias.
Address of record	For a SIP device, the AOR with which the device registers (see registration rules in
	RFC 3261), such as:
	sip:1000@westminster.polycom.com
Device authentication	Indicates whether the endpoint must authenticate itself.
	Note: Inbound authentication for the device type must be enabled at the system
	level (see Device Authentication), or the setting for the device has no effect.
Class of service	Select to specify the class of service and the bit rate limits for calls to and from this
	device.
	A call between two devices receives the higher class of service of the two.
	Note: The class of service of the device applies to point to point calls. VMR calls use
	the class of service of the conference room.
Maximum bit rate (kbps)	The maximum bit rate for calls to and from this device.
Minimum downspeed bit	The minimum bit rate to which calls from this device can be downspeeded to
rate (kbps)	manage bandwidth. If this minimum isn’t available, the call is dropped.
Model	Optional model number/name for the device.
Version	Optional version information for the device.

Polycom, Inc. 94