Local Cluster Configuration

The procedures below describe the process.

To request a software activation key code for each server

1Log into the Polycom RealPresence DMA system as an administrator and go to Admin > Local Cluster > Licenses.

2Record the serial number for each Polycom RealPresence DMA server: Server A: ____________________________

Server B: ____________________________ (none for single-server system)

3Go to http://www.polycom.com/activation.

4If you don’t already have one, register for an account. Then log in.

5Select Product Activation.

6In the License Number field, enter the software license number listed on the first (or only) server’s License Certificate (shipped with the product).

7In the Serial Number field, enter the first (or only) server’s serial number (which you recorded in step 2).

8Click Generate.

9When the activation key for the first (or only) server appears, record it: Server A: __________-__________-_________-___________

10If you have a single-server Polycom RealPresence DMA system, you’re finished with this procedure. Continue to the next procedure.

11If you have a two-server cluster, repeat steps 68, this time entering the second license number you received and the second server’s serial number (also recorded in step 2).

Caution: Activation keys linked to the server serial number

An activation key is linked to a specific server’s serial number. For a two-server cluster, you must generate the activation key for each server using that server’s serial number. Licensing will fail if you generate both activation keys from the same server serial number.

12When the activation key for the second server appears, record it: Server B: __________-__________-_________-___________

To enter license activation key codes

1Go to Admin > Local Cluster > Licenses.

2In the Activation key field for the first (or only) server, enter the activation key code that was generated for that server’s serial number.

Caution: Activation keys linked to the server serial number

An activation key is linked to a specific server’s serial number. Each Activation Key field is labeled with a serial number. For a two-server cluster, make sure that the activation key code you enter for each server is the correct one for that server’s serial number.

3If you have a two-server cluster, in the Activation key field for the second server, enter the activation key code that was generated for that server’s serial number.

Polycom, Inc.

80

Page 80
Image 80
Polycom 7000 manual To request a software activation key code for each server, To enter license activation key codes