Polycom 7000 manual About Site Topology

Site Topology

eDefine the link. See Add Site Link Dialog.

fRepeat the previous two steps for each additional site linked to this cloud.

gClick OK.

8Go to Network > Site Topology > Site-to-Site Exclusions, and for each exclusion in your network topology, do the following:

a In the Actions list, click Add.

bComplete the Add Site-to-Site Exclusions wizard. See Add Site-to-Site Exclusion Wizard.

Your site topology information is complete. For a conference with cascading for bandwidth enabled, the RealPresence DMA system can use it to route calls to the nearest eligible MCU (based on pools and pool orders) that has available capacity and to create the cascade links between MCUs.

Note: RealPresence Resource Manager integration replaces data

If in the future you integrate this system with a RealPresence Resource Manager system, the site topology information from the RealPresence Resource Manager system will replace the information you entered.

See also:

About Site Topology

Polycom, Inc. 305